top of page

Tri-Fold Brochure Size and GSM Guide 2026 (mm, inch, panels)

Writer: Bobby Yandra
Bobby Yandra
14 hours ago
13 min read

A standard tri-fold brochure is an A4 sheet, 297 x 210 mm (11.69 x 8.27 inches), folded twice into three panels of 97, 100 and 100 mm, giving a folded size of 100 x 210 mm. For the paper, 170 gsm is the standard weight and 300 gsm with lamination is the premium choice; anything heavier than 170 gsm should be creased before folding so it does not crack. 

That is the short answer. The rest of this guide is the detail we check every day at our SR Nagar unit in Hyderabad before a brochure goes on the machine: every common size in mm, cm and inches, the exact panel widths for A4, A5, A3 and US Letter tri-folds, which fold suits which job, which GSM to pick, and the file mistakes we fix most often.

Quick answer

  • A4 tri-fold: 297 x 210 mm open, panels 97 | 100 | 100 mm, folded 100 x 210 mm.

  • Inner flap rule: the panel that folds inside is 3 mm narrower, so it tucks in without bending.

  • GSM: 130 gsm for mass flyers, 170 gsm standard brochure, 250 to 300 gsm premium. Crease anything above 170 gsm.

  • File setup: 3 mm bleed on every side (A4 file = 303 x 216 mm), text at least 5 mm from trim and folds, 300 ppi, CMYK PDF.

  • Price: A4 tri-fold on 170 gsm is Rs 13 per piece at 1,000 copies at Sree Creative.

What is the standard size of a tri-fold brochure?

In India, the standard tri-fold is printed on A4. A4 is defined in ISO 216 as 210 x 297 mm. Laid landscape for a tri-fold, it is 297 mm wide and 210 mm tall, and two parallel folds divide the width into three panels. Folded, it is about 100 x 210 mm, roughly the size of a DL leaflet (99 x 210 mm), which is why it slips easily into a shirt pocket, a file or a DL envelope.

Buyers do not always describe it this way. A recent enquiry on our WhatsApp simply read "5 x 8 - 6 page" with "Brochure printing" underneath. Six pages here means six panels, so this is a tri-fold, and 5 x 8 inches is a custom size, not A4. The first job of a printer is to turn that kind of message into exact millimetres, so the size table below covers both systems.

Brochure sizes in mm, cm and inches

Common brochure and flyer sizes (ISO 216 A sizes, DL, US Letter)

Size

mm

cm

inches

Typical use

A3

297 x 420

29.7 x 42.0

11.69 x 16.54

Large tri-fold (folds to about 141 x 297 mm), posters, menu boards

A4

210 x 297

21.0 x 29.7

8.27 x 11.69

Standard tri-fold and bi-fold brochure, flyers, letterheads

A5

148 x 210

14.8 x 21.0

5.83 x 8.27

Pamphlets, small bi-folds, booklets and prospectus pages

A6

105 x 148

10.5 x 14.8

4.13 x 5.83

Handbills, inserts, offer cards

DL (1/3 A4)

99 x 210

9.9 x 21.0

3.90 x 8.27

Rack cards, folded size of an A4 tri-fold

US Letter

215.9 x 279.4

21.59 x 27.94

8.5 x 11

Files from US templates; not the same as A4

The US Letter row matters more than you would expect in Hyderabad. One client sent a brochure PDF for a quote at 21.59 x 27.9 cm. That is US Letter, the default in many American templates, and it is 6 mm wider and 18 mm shorter than A4. Printed on A4 paper without adjustment, the design either gets white strips or gets cropped. We always confirm which size the client actually wants before quoting.

Tri-fold panel widths: why one panel is 97 mm

A tri-fold is not three equal panels. In a standard tri-fold (also called a roll fold or letter fold), one end panel folds inside the other two. If all three panels were exactly 99 mm, that inside panel would hit the fold of the outer panel and buckle, and the brochure would not close flat. So the panel that folds in is made about 3 mm narrower.

On A4 that gives the numbers we use on every job: 97 mm for the inner flap and 100 mm for the other two, which adds back up to 297 mm.

Tri-fold panel widths by sheet size (roll fold, inner flap narrower)

Sheet (open, landscape)

Inner flap

Back cover

Front cover

Folded size

A4, 297 x 210 mm

97 mm

100 mm

100 mm

100 x 210 mm

A3, 420 x 297 mm

138 mm

141 mm

141 mm

141 x 297 mm

A5, 210 x 148 mm

68 mm

71 mm

71 mm

71 x 148 mm

US Letter, 11 x 8.5 in

3.625 in (92.1 mm)

3.6875 in (93.7 mm)

3.6875 in (93.7 mm)

3.69 x 8.5 in

Which panel is which

This is where most self-made tri-fold files go wrong, so here is the order. Lay the sheet flat with the outside facing you. From left to right, the panels are: the inner flap (97 mm), the back cover (100 mm) and the front cover (100 mm). Turn the sheet over and the inside reads, from left to right: inside left (100 mm), inside middle (100 mm) and inside right (97 mm). The 97 mm panel is the same piece of paper on both sides; it is on the left of the outside and the right of the inside.

The front cover is the right-hand panel of the outside, not the left. The back cover, the one people read last, sits in the middle of the outside. If you design the outside as "front, middle, back" from left to right, the brochure folds with your back cover on the front.

Our real fold proof: 97 | 100 | 100

This is the size proof we made this month for a landscaping company's 100-copy A4 tri-fold, on 300 gsm card with gloss lamination on both sides and creasing. We print the proof on A3 so both sides of the A4 sheet sit on one page, with the fold lines drawn as dotted red lines and every panel measured. The outside reads 97 | 100 | 100 mm and the inside reads 100 | 100 | 97 mm. The client checks it before we print a single copy.

A4 tri-fold brochure size proof showing fold lines at 97, 100 and 100 mm, folded size 100 x 210 mm

The proof did its job. It showed that the client's back-side artwork had panels of roughly 94, 118 and 84 mm, while the paper folds at 100, 100 and 97 mm. Printed as supplied, headings and photos would have crossed the folds. Catching that on a proof costs nothing. Catching it after 100 sheets are printed, laminated and creased means a reprint.

Is a tri-fold brochure A4?

Usually, yes. A4 is the default for tri-folds in India because paper, printers and filing all run on A sizes. But a tri-fold can be printed on any sheet. A3 tri-folds open to 420 x 297 mm and fold to about 141 x 297 mm, which gives more room for property floor plans, course details or product ranges. One buyer asked us for a "premium 300 GSM laminated" tri-fold "that opens to A3". Another sent an A3 tri-fold file for 50 copies, which we quoted at Rs 3,000. A5 tri-folds (210 x 148 mm open, 71 x 148 mm folded) suit menus, event schedules and small product leaflets.

Bi-fold vs tri-fold vs Z-fold: which one should you choose?

All three are folded flat sheets. The difference is how many panels you get and how the reader opens them.

Bi-fold vs tri-fold vs Z-fold on an A4 sheet

Fold

Panels (both sides)

A4 panel widths

Folded size

Opens like

Best for

Bi-fold (half fold)

4

148.5 | 148.5 mm

148.5 x 210 mm (A5)

A book

Company intro, price lists, menus, event programmes

Tri-fold (roll / letter fold)

6

97 | 100 | 100 mm

100 x 210 mm

Two flaps, one tucked inside the other

Services list, clinic and hospital information, real-estate projects, courses

Z-fold (accordion)

6

99 | 99 | 99 mm (equal)

99 x 210 mm

A zigzag; pulls open in one move

Step-by-step content, maps, timelines, product steps

Gate fold

6 (8 with centre spread)

Two outer flaps meet in the middle over a wide centre panel; flaps about 2 mm narrower than half the centre

About 74 x 210 mm

Doors opening to a big reveal

Launches, premium property, invitations

A Z-fold uses equal panels because nothing tucks inside: each panel folds the opposite way to the one before. That is the quickest way to tell them apart. If one panel has to sit inside the others, it needs the narrower width; if the panels zigzag, keep them equal.

Choosing between bi-fold and tri-fold is mostly a content question. A bi-fold gives you four large panels, good for big photos and a price list. A tri-fold gives you six smaller panels, good for a sequence of services or a story told panel by panel. On price, the difference is small: at 1,000 copies on 170 gsm, an A4 bi-fold is Rs 12 per piece and an A4 tri-fold is Rs 13. Our bi-fold vs tri-fold post goes deeper on layout.

Clients do switch. An interiors firm sent us artwork made as a bi-fold and chose to print it as an A4 tri-fold instead. We rebuilt the spreads on the 97 | 100 | 100 grid and previewed both sides for the client's approval. Moving a design between folds is never a simple resize; every panel's content has to be re-placed against the new fold lines.

How many GSM for a brochure?

GSM means grams per square metre: how heavy one square metre of that paper is. An A0 sheet is exactly one square metre under ISO 216, and an A4 sheet is one sixteenth of A0, so you can work out the weight of a single A4 sheet by dividing the GSM by 16. Normal office paper is 70 to 80 gsm. Brochures are much heavier.

Brochure paper weight (GSM) and what each is used for

GSM

Weight of one A4 sheet

Feel

Use it for

Crease before folding?

90 gsm

5.6 g

Thin; heavy ink can show through

Newspaper inserts, mass pamphlets

No

130 gsm

8.1 g

Light but firm, like a good flyer

Flyers, single-sheet pamphlets, inner pages of thick booklets

No

170 gsm

10.6 g

Solid brochure paper; folds cleanly

Standard bi-fold and tri-fold, prospectus inner pages

Not usually

250 gsm

15.6 g

Stiff, close to thin card

Premium brochures, booklet covers

Yes

300 gsm

18.75 g

Card; stands up in the hand

Premium laminated brochures, exhibition and site-visit hand-outs

Yes, always

Our real jobs sit at both ends of that table. The 24-page A5 prospectus we quoted this month for an education client runs on 170 gsm gloss, centre-pinned, because 24 pages of 300 gsm would be too stiff to open and too heavy to post. The landscaping tri-fold runs on 300 gsm card with gloss lamination on both sides, because it is handed out at site visits and needs to survive a day in someone's bag. Same press, opposite paper decisions, both right for the job.

Which GSM is good for a tri-fold brochure?

For most tri-folds, 170 gsm. It is heavy enough to feel like a proper brochure, light enough to fold without cracking, and it keeps the price at Rs 13 per piece at 1,000 copies. Choose 300 gsm laminated (Rs 22 per piece at 1,000 copies) when the brochure is a sales tool in the hand: property projects, hospitals, consultants, exhibitions. Go down to 130 gsm only for single-sheet flyers that are distributed in bulk; a 130 gsm tri-fold feels thin when it is opened.

Paper finish also matters. Gloss makes photos look richer and is what this month's premium short runs used. Matt reads better under strong light and feels more restrained. Both can be laminated.

Why we crease anything above 170 gsm

When thick paper is folded, the outside of the fold stretches. Above about 170 gsm the fibres cannot stretch enough, so they crack, and the printed ink on top splits into a ragged white line along the fold. It is worst on dark backgrounds and on laminated sheets, where the film can lift off the fold.

Creasing fixes this. Before folding, a creasing machine presses a channel into the sheet exactly on the fold line, so the paper bends along the channel instead of breaking. We crease every sheet heavier than 170 gsm, and creasing was written into this month's 300 gsm tri-fold quote: 100 copies, 300 gsm, gloss lamination both sides, creased, Rs 2,400.

Two more things affect cracking. The first is grain direction: paper folds more cleanly along its grain than across it, which is one reason a printer may set the sheet a particular way on the press. The second is ink coverage: a solid dark colour running across a fold shows a crack far more than a white or light background does. If your design has a dark band crossing a fold, creasing is not optional.

Bleed, safe margin and fold margin

Printing presses do not print to the exact edge of a sheet. We print on a larger sheet and cut it down. A cutting blade can move by a fraction of a millimetre, so the design must carry on past the cut line (bleed), and anything important must stay well inside it (safe margin).

A4 tri-fold file setup specification

Setting

Value

Why

Trim size

297 x 210 mm

The finished A4 sheet

Bleed

3 mm on every side

So the cut edge has no white line

File size with bleed

303 x 216 mm

297 + 3 + 3 by 210 + 3 + 3

Safe margin from trim

At least 5 mm

Text and logos stay clear of the cut

Safe margin from each fold

At least 5 mm either side

Text does not fall into the fold

Fold lines (outside)

97 mm and 197 mm from the left trim

Inner flap 97, back 100, front 100

Fold lines (inside)

100 mm and 200 mm from the left trim

Inside left 100, middle 100, flap 97

Resolution

300 ppi at final size (A4 = 3508 x 2480 px)

Sharp photos and small text

Colour mode

CMYK

RGB brights shift when printed

File format

PDF, fonts embedded or outlined, one page per side

Nothing changes between your screen and our press

Backgrounds and photos should run all the way into the bleed. Text, logos, phone numbers and QR codes should stay inside the safe area. A QR code sitting across a fold will not scan once the brochure is folded.

File setup checklist before you send

Run through this before you send a tri-fold file to any printer. It is the same list we check when a file reaches our desk.

  • The page is 303 x 216 mm with 3 mm bleed, or 297 x 210 mm with bleed added in the PDF export.

  • Outside panels are, from left: inner flap 97 mm, back cover 100 mm, front cover 100 mm.

  • Inside panels are, from left: 100 mm, 100 mm, 97 mm.

  • No text, logo, phone number or QR code within 5 mm of the trim or a fold.

  • Photos are 300 ppi at the size they print, not stretched to fill.

  • The artwork is A4 proportion (1:1.414), not a 3:2 or 16:9 image.

  • Colours are CMYK; large black areas use rich black, small text uses plain black.

  • Fonts are embedded or converted to outlines.

  • Both sides are in one PDF: page 1 outside, page 2 inside.

  • Paper weight is chosen, and creasing is confirmed if it is above 170 gsm.

  • Spelling, phone number and address have been read by someone other than the designer.

What we see go wrong (real files, real fixes)

Every one of these came across our desk. None of them are rare.

Artwork made in the wrong proportion

The landscaping client's front and back designs arrived as images of 1535 x 1024 pixels: a 3:2 shape. A4 is 1.414:1. To fill the sheet on our proof, the design had to stretch about 6% vertically. At that pixel width, spread across 297 mm, the image is also only about 130 pixels per inch, less than half the 300 ppi we want for crisp print. A design that looks sharp on a phone can print soft on paper. The fix is to design at A4 proportion, at 3508 x 2480 pixels or larger, from the start.

Panels that ignore the fold lines

The same job's back design had panels of about 94, 118 and 84 mm. The paper folds at 100, 100 and 97. A designer working without fold guides tends to place panels by eye, and the centre panel grows. We marked the true folds on the proof so the content could be moved before printing.

Pages of different sizes in one brochure

An industrial client sent four pages for a bi-fold: three at 183 x 261 mm and one at 228.6 x 292 mm with a white border around it. We cropped the odd page to the print area and showed both spreads, outside and inside, on A3 size proofs at the real folded size of 183 x 261 mm before quoting. The quote: 100 bi-folds on 300 gsm with gloss lamination, Rs 3,750, ready 4 to 5 hours after design approval.

Mockups that are not print files

One buyer sent a bi-fold mockup image with the message "can you please let me know if this can be done". It can, but a mockup is a picture of a brochure, not a file to print from. We need the flat artwork for each side, at size, with bleed. When a client only has a mockup, the design has to be rebuilt as a flat file first.

Front cover in the wrong place

The most common tri-fold mistake of all: the front cover designed on the left of the outside sheet. Folded, it ends up inside. On the outside, the front cover is always the right-hand panel.

Heavy paper folded without a crease

300 gsm folded straight cracks, and laminated 300 gsm cracks worse. If a quote for heavy paper does not mention creasing, ask.

For design-side errors that hurt flyers and brochures, see our post on flyer design mistakes.

What does a tri-fold brochure cost to print?

At Sree Creative, an A4 tri-fold on 170 gsm is Rs 13 per piece at 1,000 copies, and a premium 300 gsm laminated brochure is Rs 22 per piece at 1,000 copies. A real short run this month, 100 A4 tri-folds on 300 gsm with gloss lamination on both sides and creasing, came to Rs 2,400, ready 5 to 6 hours after design approval. Minimum order is 50 copies, design starts at Rs 2,000, and GST is extra. The full price breakdown by format and quantity, with more real quotes, is in our brochure printing cost in Hyderabad 2026 guide, and the service page is brochure printing Hyderabad.

Planning a brochure for a property project? See real-estate brochure design and printing. Need it fast? Read same-day brochure printing in Hyderabad. We also print hospital files, design logos and make packaging. Visit us through the contact page.

Frequently asked questions

How many panels does a tri-fold brochure have?

Six: three on the outside and three on the inside of one sheet. On A4 they measure 97, 100 and 100 mm on the outside and 100, 100 and 97 mm on the inside.

What is the folded size of an A4 tri-fold?

About 100 x 210 mm, close to DL size (99 x 210 mm), so it fits a DL envelope or a standard brochure rack.

Can I make a tri-fold on A3?

Yes. An A3 tri-fold opens to 420 x 297 mm with panels of 138, 141 and 141 mm, and folds to about 141 x 297 mm.

Is 300 gsm too thick for a tri-fold?

No, as long as it is creased before folding. Without creasing, 300 gsm cracks along the folds, especially with lamination or dark backgrounds.

Can I send a Canva or Word file?

Send a PDF exported at print quality with bleed. A Canva PDF (Print, with crop marks and bleed) works. Word files often shift fonts and spacing, so export to PDF first.

Do you check my file before printing?

Yes. We check size, proportion, panel widths and resolution, and send a size proof with the fold lines marked so you can approve it before we print.

What is the difference between a tri-fold and a Z-fold?

In a tri-fold, one panel tucks inside the other two, so it is 3 mm narrower. In a Z-fold the panels zigzag and are all equal, 99 mm each on A4.

Have a tri-fold file ready, or just an idea? Send the size, paper and quantity on WhatsApp: 97041 86069 and we will check it against the fold lines.

Recent Posts

See All

Comments


Sree Creative — Printing & Design Studio
📍 Sanjeeva Reddy Nagar, Hyderabad, Telangana 500038
📞 9704186069   ✉️ info@sreecreative.com
🕒 Mon–Sat 9 AM – 8 PM   |   Sun Closed
🌐 www.sreecreative.com

Privacy Policy

Sree Creative - Design and Printing in Hyderabad since 2011. Brochure design from Rs 2,000 (free with 1,000+ prints) and brochure printing from Rs 12 per piece at 1,000 copies: bi-fold, tri-fold, company profiles and catalogues on 130-300 GSM art paper, 48-hour delivery. Logo design and branding for startups, clinics, real estate firms and schools - first concepts in 4 working days, 2 concepts and 3 revision rounds, files in JPG, PNG, PDF and vector (AI/EPS). Packaging design and printing - boxes, labels and stickers for product brands, from Rs 9 per box. Hospital files and case sheets from Rs 17 per file, with annual rate contracts for hospitals and diagnostic centres. Also visiting cards, letterheads, flyers, menu cards, bill books, calendars and flex banners - free design with bulk printing, same-day dispatch for digital short runs approved before 12 noon, doorstep delivery. Serving Sanjeeva Reddy Nagar, Ameerpet, Punjagutta, Begumpet, Banjara Hills, HITEC City, Gachibowli, Madhapur, Kukatpally, Secunderabad and all of Hyderabad. Walk in to 1st Floor, 102 RR Heights, SR Nagar, Hyderabad 500038, Monday to Saturday 9 am to 8 pm, or WhatsApp +91 9704186069 for a quote within 2 hours.

bottom of page