Stand-Up Pouch Printing Hyderabad: Sizes, MOQ, Cost 2026

A 250 g stand-up pouch is typically about 140 x 210 mm with a 40 mm bottom gusset, and a 1 kg pouch about 210 x 310 mm with a 55 mm gusset (typical industry sizes). For short runs and many flavours, digital (no-cylinder) printing usually costs less; for long runs of one design, rotogravure cylinders pay for themselves. Where the break-even falls depends on colours, size and quantity, so we work it out per job.
That is the short version. This guide is written from our SR Nagar unit, where we design pouch artwork, prepare cylinder-ready separations for the converter. It covers sizes, laminates, zippers, digital vs cylinder printing, artwork rules and the FSSAI lines every food pouch must carry.
Quick answer
Typical sizes (W x H + bottom gusset): 100 g about 110 x 170 + 30 mm, 250 g about 140 x 210 + 40 mm, 500 g about 170 x 250 + 45 mm, 1 kg about 210 x 310 + 55 mm. These are typical industry sizes, not fixed standards. Fill a sample with your own product before you lock the size.
Common laminates: PET/LDPE (clear window), PET/MET-PET/LDPE (silver barrier for snacks, spices), kraft paper/MET-PET/LDPE (natural look).
Digital vs cylinder: digital for short runs and many SKUs; rotogravure for long runs of one design, because every colour needs its own cylinder.
Price: pouch rates depend on size, laminate, colours and quantity. Digital zipper pouches (250 g to 1 kg) run Rs 20 to 36 per pouch at 500 to 2,000; rotogravure runs Rs 4 to 10 per pouch at 10,000 to 50,000, plus Rs 5,000 to Rs 6,000 per colour cylinder, one time. Pouch design is quoted per product.
Food pouches must carry the FSSAI logo and licence number, veg/non-veg symbol, ingredients, nutrition, net quantity, MRP, batch and dates.
Most pouch enquiries that reach us start with a photo, not a spec. On 15 November a buyer sent one line on WhatsApp: "E type lo kavala pouches", which is Telugu for "we want pouches of this type", with a picture of a zipper stand-up pouch. Earlier this month a snack brand asked for chicken pakoda pouches in 250 g and 500 g, and a farm-products company sent a 250 g pouch PDF and asked for a quote. In every case the first job is the same: turn a photo into a size, a laminate and a quantity. This page is that conversation, written down.
What size pouch do I need for 100 g, 250 g, 500 g and 1 kg?
Pouch size depends on how dense your product is, not only on its weight. 250 g of rice takes far less room than 250 g of potato chips. So use the table below as a starting point, then do a fill test.
Typical stand-up pouch sizes (industry typical, for dense products like rice, dal, spice powders, sugar)
Fill weight | Width (mm) | Height (mm) | Bottom gusset (mm) | Typical products |
50 to 100 g | 100 to 120 | 150 to 180 | 30 to 35 | Masala sachets, tea, dry fruit samples |
250 g | 130 to 150 | 200 to 220 | 40 | Spice powders, namkeen, coffee |
500 g | 160 to 180 | 240 to 260 | 45 to 50 | Rice, millets, pakoda, sweets |
1 kg | 200 to 230 | 300 to 320 | 50 to 60 | Rice, flour, dal, sugar |
Light, bulky products (chips, puffed snacks, murukku) usually go one size up. Add about 30 to 40 mm to the height if you want a zipper, because the zipper and the tear notch sit above the fill line.
How to do a fill test in 10 minutes
Take a plain pouch close to the size in the table (most packaging shops in Hyderabad stock them).
Fill it with the real product, settled, not loose.
Leave about 25 mm of empty space under the zipper or seal line.
Stand it on a table. If it tips or bulges at the front, go wider, not taller.
Once the size is fixed, we build the artwork on that exact dieline. Changing the size after artwork is approved means the whole layout moves, and for cylinder print it means new cylinders.
Which pouch material is right: PET, MET-PET, LDPE or kraft?
A printed pouch is a laminate: two or three films bonded together. The outer film carries the print, the middle film gives barrier, and the inner film seals. Here is how the common Indian structures compare.
Common pouch laminate structures and where they fit
Structure | Look | Barrier | Good for |
PET / LDPE | Clear, glossy, product visible | Basic moisture barrier | Rice, dal, millets, dry products with short shelf life |
PET / MET-PET / LDPE | Silver inside, bright colours | Good light, oxygen and moisture barrier | Namkeen, chips, spices, coffee, tea |
PET / Aluminium foil / LDPE | Opaque, premium | Highest barrier | Long shelf life, oily or aroma-sensitive products |
Kraft paper / MET-PET / LDPE | Brown paper, natural | Good (from the metallised layer) | Organic, millets, homemade brands |
Matt PET / LDPE | Soft matt finish | Basic | Premium dry products |
Two practical points buyers often miss. First, if you want a clear window on a metallised pouch, the window must be planned in the artwork, because the metallised layer has to be left out in that area. Second, LDPE thickness controls how strong the seal is. Heavier fills like 1 kg rice need a thicker sealing layer than a 100 g spice pouch. The converter confirms the micron build-up for your product; we put it on the artwork brief so nobody guesses.
Do I need a zipper, tear notch or hang hole?
A resealable zipper is now the default for most retail pouches above 100 g. A buyer on 1 November simply wrote "Resealable pouches" as the whole enquiry, which tells you how expected it has become.
Zipper (press-to-close): adds cost per pouch and needs extra height above the fill line.
Tear notch: a small cut in the side seal so the pouch tears open cleanly above the zipper. Almost free; always ask for it.
Hang hole (round or euro slot): for kirana and supermarket peg display.
Window: lets the customer see rice, dal or dry fruit. Plan it early, as above.
Valve: only for fresh roasted coffee that releases gas.
Digital or rotogravure (cylinder) printing: which one makes sense?
This is the question that decides your budget. Rotogravure is how most printed pouches in Indian shops are made. Each colour in your design is engraved on a separate metal cylinder. A 6-colour design means 6 cylinders. Once the cylinders exist, the per-pouch cost is low, and reprints use the same cylinders. Digital printing needs no cylinders at all, so the setup cost is close to zero, but each pouch costs more.
Digital vs rotogravure pouch printing
Point | Digital (no cylinder) | Rotogravure (cylinder) |
Setup cost | Very low | One cylinder per colour, charged on the first order: Rs 5,000 to Rs 6,000 per colour cylinder, one time |
Minimum order | Low; some Indian digital suppliers advertise from 500 pouches | High; converters usually set MOQ in kg of film or thousands of pouches per design |
Per-pouch cost | Higher | Lower at volume |
Many SKUs / flavours | Easy, change artwork per pouch | Each design needs its own set of cylinders |
Colour match on reprint | Good | Very consistent once cylinders are approved |
Lead time | Shorter | Longer (cylinder engraving comes first) |
A simple way to decide
Launching a new product, testing the market, or have 5 or more flavours? Start digital.
One design, steady sales, reorders every month? Cylinder print, because the cylinder cost is spread over every reorder.
Somewhere in between? Ask us for both quotes on the same spec. The break-even depends on number of colours, pouch size and quantity, so it has to be worked out per job.
For a Hyderabad low-GI rice brand we prepared artwork for 5 kg and 10 kg bags this month. The 5 kg bag dieline is 690 x 457 mm, with a front panel of 260 x 457 mm. Because the bag was going to cylinder print, we rebuilt the front panel as a fully layered vector file: photo, banner, icons, logo and text each on their own layer, so the printer could switch any one off and make clean separations. The only raster left was the background photo, kept byte-identical in CMYK.
Why does a transparent pouch need a white ink layer?
On clear film, colours print as transparent inks. Without a white layer underneath, your cream or yellow panel looks dull and the product inside shows through the design. Pouch printers solve this with a separate white ink, printed behind the colours.
On that rice bag we added a dedicated "white-ink" layer as a spot colour named White, set to overprint and switched off by default so it does not confuse the client's screen proof. It sits under the cream panel only, as the client asked. We also flagged in writing that on clear film the photo areas need white underneath too, or the photo prints thin. That decision belongs to the printer and the brand, and it has to be made before cylinders are engraved, not after.
Rule of thumb for any clear or window pouch: tell your designer early whether the film is clear, white or metallised. The artwork file is different for each.
Artwork rules for pouch printing
Pouch artwork checklist we use before sending files to print
Check | What we do |
Dieline | Built from the converter's dieline: front, back, gusset, seal areas and zipper line marked |
Seal and zipper zones | No text or logo in side seals, top seal or on the zipper line |
Bleed | Artwork runs past the cut line as the converter specifies |
Colour mode | CMYK plus named spot colours; white ink as its own spot layer for clear film |
Text | Live text for client changes, plus an outlined (text-to-curves) copy for print |
Minimum text size | Legal lines kept readable; FSSAI and Legal Metrology minimum sizes followed |
Barcode | Placed on a light, flat panel, never across a fold or gusset |
Coding area | A plain light box left for batch number, packing date and expiry printed at the packing line |
What must be printed on a food pouch (FSSAI and Legal Metrology)?
If the pouch holds food sold in India, the label lines come from the Food Safety and Standards (Labelling and Display) Regulations, 2020, and the quantity and price lines from the Legal Metrology (Packaged Commodities) Rules, 2011. The core lines:
Name of the food (what it is, not only the brand name)
List of ingredients, in descending order of weight
Nutritional information per 100 g (energy, protein, carbohydrate, sugars, fat and the other values the regulation lists)
Veg (green circle in a green square) or non-veg (brown triangle in a brown square) symbol, on the front panel
Food additives by class name and INS number, if used
Allergen declaration where the product contains listed allergens
Name and full address of the brand owner and the manufacturer or packer
FSSAI logo and licence number, in a colour that contrasts with the background
Net quantity, MRP (inclusive of all taxes), consumer care details
Batch or lot number, date of manufacture or packing, and expiry or use-by date
On a pouch, the batch, date and MRP are often printed at the packing line with an inkjet coder, not in the artwork. That is why the coding box in the checklist matters. If the whole pouch is dark or metallic, the coder ink does not show. Your label consultant or food technologist should confirm the final wording for your product category; we make sure every line fits, reads clearly and sits where the rules place it.
What we see go wrong with pouches
Layered photo in the gusset changes colour. On the rice bag, an earlier print PDF had the gusset as a faded photo with icons on top. The client noticed the colour had shifted from the approved image. We rebuilt the gusset as solid green with white icons, exactly like the approved version. Lesson: in narrow panels, solid colour prints more reliably than a semi-transparent photo.
Approved colour vs print file drift. The same client later wrote "Color same??" next to the image they had approved weeks earlier. We regraded the front photo to match the approved image and re-checked the cream panel. Always keep the approved image as the colour reference and compare against it, not against memory.
Size picked from a photo. A pouch copied from a competitor's picture can be 20 mm too short for your product. Fill test first.
Text inside the seal. Side seals are hot-pressed. Anything printed there gets crushed or cut.
No white layer on clear film. Light colours disappear. Decide white ink coverage before cylinders.
One cylinder set for six flavours. If only the flavour name and colour change, ask the converter which cylinders can be shared. Sometimes only one or two cylinders need changing per flavour.
How much does stand-up pouch printing cost in Hyderabad?
We do not publish a fixed pouch rate, because the same 250 g pouch can cost very different amounts depending on these five things:
What drives the price of a printed pouch
Cost driver | Effect |
Pouch size | More film per pouch |
Laminate (2-layer vs 3-layer, foil, kraft) | Barrier layers add film cost |
Print method | Digital: no cylinder, higher per pouch. Cylinder: cylinder charge plus lower per pouch |
Zipper, window, hang hole | Each adds to the per-pouch rate |
Quantity and SKUs | Higher quantity per design lowers the rate |
Stand-up pouch printing rates, Hyderabad 2026 (PET/MET-PET/LDPE with zipper)
Pouch | Digital (no cylinder) | Rotogravure (cylinder) |
250 g (140 x 210 + 40 mm) | Rs 20 to 36 per pouch at 500 to 2,000 pouches; the smaller pouch and the larger quantity sit at the low end | Rs 4 to 10 per pouch at 10,000 to 50,000 pouches, plus Rs 5,000 to Rs 6,000 per colour cylinder, one time |
500 g (170 x 250 + 45 mm) | ||
1 kg (210 x 310 + 55 mm) |
Prices exclude 18% GST. Rates as of November 2026; final quote depends on artwork and finish.
Pouch artwork design is quoted per product. For example, we quoted a snack brand Rs 22,500 for pouch packaging design across 9 products in November 2026. If you also need a brand mark, see our logo design packages; for labels on jars and bottles, see the sticker and label page (from Rs 2 per sticker).
What to send us for a pouch quote
Product and fill weight (for example "rice, 1 kg" or "pakoda, 250 g")
Pouch type: stand-up with zipper, 3-side seal, centre seal, or "this type" with a photo
Film choice if you know it (clear, silver, kraft), or tell us the shelf life you need
Number of designs or flavours, and quantity per design
Whether you need design, or only print-ready separations from your existing artwork
Frequently asked questions
What is the size of a 1 kg stand-up pouch?
For dense products like rice or sugar, a 1 kg stand-up pouch is typically about 200 to 230 mm wide, 300 to 320 mm tall, with a 50 to 60 mm bottom gusset. This is a typical industry size; bulky products need a larger pouch, so do a fill test.
What is the minimum order for printed pouches?
It depends on the print method. Digital pouch printing has low minimums, and some Indian suppliers advertise from 500 pouches. Rotogravure needs much higher quantities per design because of cylinder cost. Send your quantity per design on WhatsApp and we confirm which method fits, same day.
How much do pouch printing cylinders cost?
Each colour needs one cylinder, so a 6-colour design needs 6. Cylinder charge is Rs 5,000 to Rs 6,000 per colour, one time, so 6 colours come to Rs 30,000 to Rs 36,000. Cylinders are reused for reprints, so the cost is mainly a first-order cost.
Can you print a transparent pouch so the rice shows?
Yes. A PET/LDPE clear pouch or a metallised pouch with a planned window both work. On clear film the artwork needs a white ink layer under any light colour, which we build as a separate spot layer.
Is kraft paper pouch food-safe?
Kraft pouches for food have an inner food-contact sealing film (usually LDPE) and often a metallised barrier layer. The paper is the outside layer. Ask the converter for the food-grade declaration of the inner film.
Do you design pouch artwork from our existing logo?
Yes. We build the pouch on the converter's dieline using your logo, product photos and label text, and supply print-ready PDFs with live and outlined text plus separate layers for cylinder separations.
Talk to us about your pouch
Send a photo of the pouch type you like, your fill weight and quantity. We will tell you the size, film and print method that fits, before you spend on cylinders. See our packaging design service, our packaging design and printing overview, the FSSAI jar label guide, our food label sticker guide and the box printing cost guide. Visit us at SR Nagar via the contact page.

Comments